Is There A Sewing Machine That Threads Itself?

Self-Threading Sewing Machines-All You Need To Know

Threading the needle is the most difficult part of any sewing project for most sewers. It’s not so much threading it through the machine as it is trying to cram a very thin piece of thread into the eye of an even smaller needle.

We try to poke it patiently, with our fingers crossed only to sigh in frustration when we fail. But there is an easier way!

Both beginners and experts have often considered ditching the time-consuming task of threading needles in favor of self-threading sewing machines.

Is There A Sewing Machine That Threads Itself?

To answer, yes. Self-threading sewing machines are the way to go, especially if you lack skill, dislike threading, or have poor vision. Nothing is more difficult than threading a sewing machine.

Some people find it difficult to thread a sewing machine. If you’re tired of struggling to thread the needle, a self-threading sewing machine might be for you. Spend less time fighting with the thread and more time sewing.

An automatic needle threader is included with a self-threading sewing machine. This useful component makes threading the needle a breeze. This enables you to devote more time to sewing and being productive.

Many new sewing machine models include an automatic threader. It is an essential feature for some people that allows them to sew. Without it, they would be unable to thread the needle without assistance.

How To Self-Thread A Sewing Machine?

Threading apparatuses are very similar within and even between brands. As a result, your choice of self-threading sewing machines is ultimately determined by the other features you desire in your machine.

You’ll appreciate having a sewing machine that threads itself, whether it’s a basic sewing machine or a more fully-featured computerized sewing machine.

If you have a sewing machine, you can self-thread by following these steps:

  1. Take the needle out of the machine and hold it in your left hand.
  2. Wrap one end of your thread around the eye of the needle and pull it through so that approximately 3 to 4 inches hang off each side.
  3. Insert your threaded needle into any opening on the top of the machine that has a space for a bobbin.
  4. Pull up gently while holding both ends of the thread until they tighten against each other inside, then let go with your right hand while keeping the needle in place.
  5. Turn on your sewing machine. When you hear the motor start, gently pull your thread out of the slot where your bobbin should be, and then let go with your right hand while holding onto the needle.
  6. Using scissors, cut a 3 to 4-inch piece off the spool and insert it into the bobbin holder by inserting one end first and then pulling the rest through with your hand until it is completely inside.
  7. Turn off your sewing machine and then release the needle with your left hand once you’ve inserted the end of your thread into the bobbin holder.
  8. Insert a new bobbin into the bobbin holder. Turn on your sewing machine and gently press down on your needle until you see it move backward under the pressure of its spring.
  9. Remove your needle from the machine and, with one hand, hold both ends of the thread and place the loop end over the top of an inside hook, which will pull it into place beneath to secure it.
  10. After threading the hook, turn off your sewing machine and lift the top cover of your machine.
  11. Take out your new empty bobbin, remove your old thread from inside it, and then insert a spool of thread into the holder with one end facing the opening slot where the needle is located.
  12. Replace your bobbin holder in its original location in your sewing machine and turn it back on.
  13. Hand wind the bobbin until you feel resistance, then release the thread because your new spool now has some tension between your sewing machine and the case that was originally used for a regular bobbin to keep it from unwinding while in use.
  14. Place a piece of fabric beneath your material feeder and press your foot pedal to begin sewing.
  15. When you’re finished, turn off your sewing machine by unplugging it or turning off a switch, depending on the model, and then use scissors to cut off excess thread from your sewing project.

What Factors Should You Consider

While Buying Self Threading Sewing Machine?

Self-sewing machines are frequently built with low-quality gears and parts. The motors are frequently insufficient and cannot handle a wide range of fabrics. These sewing machines were not intended for crafters or quilters.

When looking for a self-threading sewing machine, you should consider the following features:

1. Capability With A Free Arm

If you’re sewing narrow, round garment pieces, a free arm is a must-have feature.

2. Count Of Stitches

If you want a machine that can handle regular everyday sewing, you should look for one with 10-30 stitches. If you intend to quilt or make other crafts, you will need a large number of stitches to work with. Some machines have more than 1000.

3. Bobbin Insertion

Loading the bobbin should be straightforward. The drop-in bobbin feature eliminates all hassle.

4. Bobbin Cover In Clear

Nothing is more frustrating than sewing and discovering that your bobbin has run out of thread. A clear bobbin cover allows you to see how much thread is left.

5. Framework Design

Sewing machines with a lot of plastic parts will wear out faster than machines with metal frames and components.

6. Weight

If you have a specific location for your sewing machine, you will want something heavy. The weight contributes to less bouncing and missed stitches. If you need a portable machine, you’ll want something lighter and easier to transport.

7. Speed

The best sewing machines can stitch at a rate of 800 to 1000 stitches per minute. If you’re just starting, you might not want a machine that can sew that quickly.

8. Price

Sewing machine prices can vary greatly. The best heavy-duty sewing machines are frequently significantly more expensive than regular sewing machines. If you’re looking for a beginner sewing machine, a good one should cost around $200.

Is it heavy duty

A heavy-duty sewing machine is required when sewing thick fabrics. Regular sewing machines are incapable of handling thick fabrics.


Check the warranty to see what it covers. Examine customer reviews to determine how simple it is to work with the company’s customer service department. And, thanks to the internet, there are countless sites where you can get unbiased feedback.

Related Questions

Why do people buy self-threading machines?

People buy self-threading sewing machines for a variety of reasons, including Poor vision, Inadequate motor skills, having trouble threading a needle, etc.

What exactly is automatic threading?

Many sewing machines sold today include an automatic threader. This is essentially a lever that will guide the thread through the eye of your sewing needle for you, saving you time.


In short, self-threading machine threads the needle quickly and easily. This feature allows you to thread your needle in seconds, regardless of the density of the fabric. All that is required is that the needle is placed in the proper location. The machine then passes it through the needle.







If you liked this article, you may want to join our community through this Newsletter. I look to provide something extra to the people who are interested! See you on the other side!